|
ESD Products
STATIC ALARM (Model: SA-01)
The Static Alarm SA-01 is a portable, battery-operated instrument,
incorporating the latest technology, to indicate the presence of
approaching static electricity. It is designed to provide a quick and
convenient method of locating static charges. It is primarily intended
for use in static-safe handling areas, as an early warning system to
alert the personnel nearby. The hazard may be in the form of personnel
who are generating static or personnel who may be holding a charged
object without observing the standard safety procedures for handling
static sensitive devices. The instrument incorporates a unique
selfresetting feature and therefore requires no manual adjustments or
zeroing. It can be kept 'ON' for continuous monitoring of critical
static-safe areas.
Operation
A static charge on any object produces an electric field whose strength
is an inverse function of the distance from the charge. A given
magnitude of charge always produces a given field strength at a given
distance. The unique sensor of the instrument actually responds to this
electric field. However, more specifically, it senses only changes in
the electric field, so to detect a charge there should be relative
motion between the instrument and the charged body.
SPECIFICATIONS
| Detection method |
charge coupling by field Interception |
| Detection sensitivity |
+/- >100V |
| Range selection |
Auto ranging and auto resetting |
| Indication |
LED visual Indication with Audible alarm |
| Power supply |
9V Battery |
| Dimensions |
135 x 70 x 25 mm |
| Weight |
Approximately 125G (with battery) |
STATIC NEUTRALIZER (Model: SNP-01)
The generation and
accumulation of unwanted electrostatic charges, both
surface and airborne, poses a serious problem in various industries and
laboratories. For instance, static charges can create havoc with
sensitive equipment and electronic components. This Bench Top
Instrument is designed to neutralize your ESD work-station or ESD
protected area with a stream of ionized air. It does what Wrist straps,
conductive mats & ESD Laminates cannot do i.e., remove static
charges from non conductive objects and surfaces. The Static
neutralizer is portable and uses a small fan to produce airflow. High
voltages are generated out of the supply line, HV voltage is applied to
stainless steel ion emitter points. These points produce intense
alternating polarities, ionizing the air instantly from the fan
airflow. The Static neutralizer is designed for when handling sensitive
electronic components where electrostatic discharge is a problem. The
unit can also be used where static electricity causes problems such as;
attraction of drift to product, misalignment of small parts
due to electrostatic jumping and undesirable adhesion of plastic
films due to electrostatic charge.
Specifications
| Air flow |
1.8 cu m/min |
| Noise Level |
45dba (at 1 m) |
| Power Supply |
210V 250V AC/50Hz |
| Ionization Voltage |
+/- 6KV |
| Un Balance Voltage |
< +/- 100V |
| Construction |
Power coated MS cabinet |
| Dimensions |
230 x 150 x 110mm |
| Weight |
Apex. 2.9 Kgs |
| Warranty |
One Year |
OVER HEAD IONIZER (Model: OHI-01)
The generation and accumulation of unwanted electrostatic charges, both
surface and airborne, poses a serious problem in various industries and
laboratories. For instance, static charges can create havoc with
sensitive equipment and electronic components. This Over Head Ionizer
is designed to neutralize your ESD work-station
or ESD protected area with a stream of ionized air. It does what Wrist
straps, conductive mats & ESD Laminates cannot do- i.e remove
static charges from non-conductive objects and surfaces. The Over Head
Ionizer uses three/four small fan to produce airflow. High voltages are
generated out of the supply line, HV voltage is applied to stainless
steel ion emitter points. These points produce intense
alternating polarities, ionizing the air instantly from the fan
airflow. The Over Head Ionizer is designed for when handling sensitive
electronic components where electrostatic discharge is a problem. The
unit can also be used where static electricity causes problems such as;
attraction of
drift to product, misalignment of small parts due to electrostatic
jumping
and undesirable adhesion of plastic films due to electrostatic charge.
Specifications
| Air flow |
90 CFM |
| Noise Level |
43 dBA |
| Power Supply |
210V 250V AC/50Hz |
| Ionization Voltage |
+/- 6KV |
| Un Balance Voltage |
< +/- 100V |
| Construction |
Power coated MS cabinet |
| Dimensions |
1220 x 200 x 120mm |
| Warranty |
One Year |
|
