|
ESD Absorber
FUME ABSORBER (Model: FA-01)
FUME ABSORBER is a compact, portable, self-standing, low noise unit
which can be adjusted to any angle for maximum smoke absorption and is
specially designed to suck the harmful fumes away from the operator
which then gets absorbed onto an activated carbon filter. FUME ABSORBER
is designed for table top operation.
SPECIFICATIONS
| Power source |
230 V AC |
| Power consumption |
20 Watts |
| Fan |
Sealed ball - bearing brush less Motor |
| Air Volume |
1.8 cu m / min |
| Filter element |
Replaceable activated - carbon foam |
| Filer size |
150 x 200 X 230 MM |
| Warranty |
12 months |
Common Ground Point Model: CGP-01
This simple system brings all the connections (2 Wrist straps, Work
surface) to the same potential before grounding so that inter
connection electrostatic discharges are eliminated. Compliant to ANSI
ESD S5.1 Standard for grounding Can be installed at the workstation
conveniently Accepts wrist straps with banana jack and button
connections
COMBO TESTIG ZIG (Model: CTZ-01)
The COMBO TESTING ZIG is a jig type arrangement to check the Surface
Resistivity Meters, Wrist Strap / Foot Wear Testers & Work Station
Monitors.
SPECIFICATIONS
| RESISTANCE VALUE |
SRM DECADES |
% OF TOLERANCE |
| 1 KΩ |
10^3 |
10 % |
| 10 KΩ |
10^4 |
10 % |
| 100 KΩ |
10^5 |
10 % |
| 680 KΩ |
- |
10 % |
| 750 KΩ |
- |
10 % |
| 1 MΩ |
10^6 |
10 % |
| 1.1 MΩ |
- |
10 % |
| 2.7 MΩ |
- |
10 % |
| 10 MΩ |
10^7 |
10 % |
| 11 MΩ |
- |
10 % |
| 35 MΩ |
- |
10 % |
| 38.5 MΩ |
- |
10 % |
| 75 MΩ |
- |
10 % |
| 83 MΩ |
- |
10 % |
| 100 MΩ |
10^8 |
10 % |
| 110 MΩ |
- |
10 % |
| 1 GΩ |
10^9 |
10 % |
| 1.1 GΩ |
- |
10 % |
| 10 GΩ |
10^10 |
10 % |
| 100 GΩ |
10^11 |
10 % |
| Resistance Selection |
By Rotary Switch |
| Dimensions |
200 x 280 x 40 mm |
| Calibration |
Recommended every 12 months |
| Warranty |
12 Months |
HUMAN BODY VOLATGE CHECKER (Model: SC-01)
Human body voltage checker is a new and unique visual method of
detecting how much static charge a person is carrying. The unit can be
wall mounted outside the ESD protected area to avoid charged persons
unknowingly entering. The meter must always be grounded to produce an
accurate measurement. But more importantly to allow the operator to
discharge to a safe handling limit. Touch the Touch to test, and watch
the LIQUID CRYSTAL DISPLAY indicated between 0 to 1999V of the static
charge +/- Polarity.
SPECIFICATIONS
| Power Supply |
9V Battery |
| Accuracy |
+/- 10% |
| Resolution |
1 Volt |
| Low Battery Indication |
By LCD Display |
| Test Actuation |
Touch To Test |
| Dimensions |
135 x 70 x 25 mm |
| Weight |
150 Gms (with battery) |
| Calibration |
Recommended every 12 months |
| Warranty |
12Months |
| Accessories |
1Meg Ohm Ground Cord, Instruction Board & Carry Case |
APPLICATION
1. Static checker can be used to detect how much static a person is
carrying.
2. Will indicate if wrist straps and coil cords are functioning, ground
leads, bounding plugs, heel straps, custom floors, Static Spray
Coating, etc
HUMAN BODY VOLTAGE CHECKER (Model: SC-02)
Human Body Voltage Checker is a new and unique visual method of
detecting how much static charge a person is carrying. The unit can be
wall mounted outside the ESD protected area to avoid charged persons
unknowingly entering, or used by operators to periodically check that
they are not creating a charge within the protected area. It is very
simple to use and only requires the personnel under test to touch the
plate on the instrument and directly read the charge level on the
meter. Apart from the measuring the charge, it can also be used to
safely drain away the charges existing on the body.
It has a feature of visual and audible warning when it detects voltage
over a certain threshold.
IMPORTANT INSTRUCTIONS
The instrument must always be connected to ground; not grounding the
unit can result in inconsistent results. The circuit will only become
responsive when you offer a path to ground.
APPLICATION
1. Human Body Voltage Checker can be used to detect how much static a
person is carrying.
2. Human Body Voltage Checker will audit any potential static generator
or dissipater, like. Wrist straps, heel grounders, toe straps, static
safe shoes, chairs, floor mats, ground leads, purpose built floors,
garments, static sprays, floor finishes, etc....
|
