|
ESD Static Meter
STATIC CHARGE METER (MODEL: SCM-01)
The Static Charge Meter is a non contact, low cost, light weight static
monitoring and locating instrument. It utilises a centre-zero meter
display to indicate the magnitude and polarity of the electrostatic
charge. The instrument has good directional sensitivity and is ideal
for measuring electric charges encountered in critical electronic
assembly and storage areas as well as Antistatic Work stations. It can
also be used for Plastics, Paper, Textiles, Food, Explosives and
Pharmaceutical Industries. The unit gives direct readings of
electrostatic potentials on any surface, when held at a distance of 2.5
cms. However, virtually any electrostatic potential can be measured by
proportionately increasing the distance from the meter to the charged
object.
SPECIFICATIONS
| Measurement Range |
+/- 5kV At 2.5 CMS |
| Measurement Accuracy |
+/- 10% |
| Indication |
Analog Dial |
| Test actuation |
Press TO read |
| Power supply |
9 Volt Battery |
| Dimensions |
125 x 65 x 35 mm |
| Weight |
180GMS (With Battery) |
| Calibration |
Recommended every 12 months |
| Warranty |
12 Months |
| Optional |
Instrument Carry case |
STATIC METER (MODEL: SCM-02)
Reliable on-the-spot measurement of static charges has been easier
than with the portable SCM-02. Hand-held, yet highly accurate and low
drift, the SCM-02 answers three basic questions: 1) Is static present
and on what Surfaces, Materials or people? 2) How much static? 3) What
is the polarity of the Charge? The instrument is ideal for use in such
static sensitive environment as electronic component production and
assembly areas, clean rooms, computer, medical and R&D
Laboratories, surgical rooms, medical device manufacturer, printing
press, packing and production lines, etc. The unit gives direct
readings of electrostatic potentials on any surface, when held at a
distance of 1 Inch. However, virtually any electrostatic potential can
be measured by proportionately increasing the distance from the meter
to the charged object.
SPECIFICATIONS
| Measurement Range |
+/- 10kV @ 1 Inch (Accuracy: +/-10%)
+/- 20kV @ 2
Inch (Accuracy: +/-15%)
+/- 30kV @ 3 Inch (Accuracy: +/-20%) |
| Resolution |
100 Volts |
| Indication |
2 ½ Digit LCD Display |
| Test actuation |
Press TO read |
| Power supply |
9 Volt Battery |
| Battery Status |
By Dual color LED. |
| Calibration |
Recommended every 12 months |
| Dimensions |
135 x 70 x 25 mm |
| Weight |
150 Gms |
| Warranty |
12 Months |
| Accessories |
Carry case. |
STATIC LOCATOR (MODEL: SCM-03)
Reliable on-the-spot measurement of static charges has been easier than
with the portable SCM-03. Hand-held, yet highly accurate and low drift,
the SCM-03 answers three basic questions: 1) Is static present and on
what surfaces, materials or people? 2) How much static? 3) What is the
polarity of the charge? The instrument is ideal for use in such static
sensitive environment as electronic component production and assembly
areas, clean rooms, computer, medical and R&D Laboratories,
surgical rooms, medical device manufacturer, printing press, packing
and production lines, etc. The unit gives direct readings of
electrostatic potentials on any surface, when held at a distance of 1
Inch. However, virtually any electrostatic potential can be measured by
proportionately increasing the distance from the meter to the charged
object.FEATURES
- Light weight & Hand held model
- Boldly visible 2-½ LCD display
- Auto Zero setting
- Over range indication
- UHB LEDs to locate 1 distance
SPECIFICATIONS
| Range |
+/-10kV @ 1 Inch (Accuracy: +/- 10%)
+/-20kV @ 2 Inch (Accuracy: +/- 15%)
+/-30kV @ 3 Inch (Accuracy: +/- 20%) |
| Resolution |
100 volts |
| Display |
2-½ digit LCD |
| Power |
9V Battery |
| Low battery |
By LCD Display |
| Over scale |
▲ (Indicates over range) |
| Dimensions |
25 x 60 x 120 mm |
| Weight |
140gms (with battery) |
| Calibration |
Recommended every 12 months |
| Warranty |
12 Months |
| Accessories |
Carry Case |
STATIC METER (MODEL: SCM-04)
Reliable on-the-spot measurement of static charges has been easier than
with the portable SCM-04. Hand-held, yet highly accurate and low drift,
the
SCM- 04 answers three basic questions: 1) Is static present and on what
surfaces, materials or people? 2) How much static? 3) What is the
polarity of the charge? The instrument is ideal for use in such static
sensitive environment as electronic component production and assembly
areas, clean rooms, computer, medical and R&D Laboratories,
surgical rooms, medical device manufacturer, printing press, packing
and production lines, chemical industries etc. The unit gives direct
readings of electrostatic potentials on any surface, when held at a
distance of 1 Inch. However, virtually any electrostatic potential can
be measured by proportionately increasing the distance from the meter
to the charged object.FEATURES
- Hand held model
- Auto Zero setting
- Over Range & Low Battery indication in LCD display.
- Hazard Indication & audible sound for +/- 1 kV and above
voltages.
SPECIFICATIONS
| Range |
+/-10kV @ 1 Inch (Accuracy: +/- 10%)
+/-20kV @ 2 Inch (Accuracy: +/- 15%)
+/-30kV @ 3 Inch (Accuracy: +/- 20%) |
| Resolution |
100 volts |
| Display |
2-½ digit LCD |
| Power |
9V Battery |
| Low battery |
By LCD Display |
| Over scale |
▲ (Indicates over range) |
| Dimensions |
158 x 85 x 30 mm. |
| Weight |
200gms with Battery. |
| Calibration |
Recommended every 12 months |
| Warranty |
12 Months |
| Accessories |
Carry Case. |
|
